before i knew that giving my dog a bath everyday was bad i gave him one everyday or every other day. and now his skin is dry and its itchy for him. what can i use to stop that and replace the oils in his skin and coat?What product should my dog use for natural oil replacement?
Brush your dog every day to stimulate the oil glands. You can feed your dog salmon oil capsules or flaxseed oil. Both are very good for dogs.What product should my dog use for natural oil replacement?
Letting up on the bathing will help. Also you can put a teaspoon of vegetable oil on his dog food to help his dry skin.
Friday, December 18, 2009
How much money is being used to research for an oil replacement?
how much money is being used to research for a replacement for oil? I need to know for my science research project. And ';a lot'; is a horrible answer cuz it's pretty obvious.How much money is being used to research for an oil replacement?
Since the government spends virtually nothing, and the oil monopolies won't say what they are spending and how they will maintain their position when it goes into use, you are looking for a number that at best would be a wild guess.
Many institutions and individuals are engaged in the research.
';A lot'; would be a bad answer, because there should be several orders of magnitude more being spent on it.
Since the government spends virtually nothing, and the oil monopolies won't say what they are spending and how they will maintain their position when it goes into use, you are looking for a number that at best would be a wild guess.
Many institutions and individuals are engaged in the research.
';A lot'; would be a bad answer, because there should be several orders of magnitude more being spent on it.
How to use the pantene oil replacement complete theraphy? Is this use after or before SHOWER?
My friend gave me a product of Pantene but I could not read the detailes on how to use it because it is writen in ARABIC. The only words I read is that PANTENE -OIL REPLACEMENT COMPLETE THERAPHY. iS This difference from Conditioner? thank you.How to use the pantene oil replacement complete theraphy? Is this use after or before SHOWER?
You would use it before. Any hair product that has any oils in it is meant to be used before you shower.This is because your hair will be very greasy and gross looking if left in after showering. I hope this helps!
PS: Leave in for about 20 mins or so...I use v-05 hair oil and that about how long I leave it in. The longer the better it'll do your hair.
xox
You would use it before. Any hair product that has any oils in it is meant to be used before you shower.This is because your hair will be very greasy and gross looking if left in after showering. I hope this helps!
PS: Leave in for about 20 mins or so...I use v-05 hair oil and that about how long I leave it in. The longer the better it'll do your hair.
xox
How do you Reset the oil replacement reminder in your car?
I have 2007 Toyota FJ Cruiser...and that annoying light is on ...how do you Reset the oil replacement reminder ?
According to Toyota web site, there are only two things that need to be done. (Besides the visual inspections)
I have done the oil change and rotated the tires already...But, what about the reminder light?
Is there a mechanic out there, who can help me?How do you Reset the oil replacement reminder in your car?
Maintenance Reminder Light. The following procedure
should be used to reset the light when the oil has been changed.
1. Turn the ignition switch to the “ON” position.
2. Set the Odometer / Trip Display to the “ODO” mode.
3. Turn the ignition switch to the “OFF” position.
4. Depress and hold the Trip Meter “RESET” button while turning the ignition switch to the “ON” position.
5. Release the Trip Meter “RESET” button.
6. Turn the ignition to the “OFF” position.
7. Turn the ignition to the “ON” position, and confirm that the Service Maintenance Reminder Light goes out.How do you Reset the oil replacement reminder in your car?
there should be a button on the gauges to reset that.
You don't need a mechanic, just read your owner's manual.
It's in your owners manual. I don't know the specific procedure on your car, but, it will tell you in your owners manual.
According to Toyota web site, there are only two things that need to be done. (Besides the visual inspections)
I have done the oil change and rotated the tires already...But, what about the reminder light?
Is there a mechanic out there, who can help me?How do you Reset the oil replacement reminder in your car?
Maintenance Reminder Light. The following procedure
should be used to reset the light when the oil has been changed.
1. Turn the ignition switch to the “ON” position.
2. Set the Odometer / Trip Display to the “ODO” mode.
3. Turn the ignition switch to the “OFF” position.
4. Depress and hold the Trip Meter “RESET” button while turning the ignition switch to the “ON” position.
5. Release the Trip Meter “RESET” button.
6. Turn the ignition to the “OFF” position.
7. Turn the ignition to the “ON” position, and confirm that the Service Maintenance Reminder Light goes out.How do you Reset the oil replacement reminder in your car?
there should be a button on the gauges to reset that.
You don't need a mechanic, just read your owner's manual.
It's in your owners manual. I don't know the specific procedure on your car, but, it will tell you in your owners manual.
After centrifugation process on leech oil extraction, how to purify soluble component to pure oil?.?
Thanks michealhobbsphd for your answer. Need more information on how to purify this lipids soluble component to pure clean oil %26amp; possble others thats usable in medical practice. Further, after obtaining the oil, the left over soild, how to make it to powder form?. I think this leech powder is used in the cosmetic development as an ingrediant and in chinese medicine too. Could anyone explain to me about this solid waste, could it be use further?. Thanks...After centrifugation process on leech oil extraction, how to purify soluble component to pure oil?.?
You could try distillations, solven extractions with acetone or other solvents to seperate amphipathics. Freezing separations. These will narrow down the class of molecules then you should be able to try HPLC, perhaps a C18 or C4 column.
You could try distillations, solven extractions with acetone or other solvents to seperate amphipathics. Freezing separations. These will narrow down the class of molecules then you should be able to try HPLC, perhaps a C18 or C4 column.
We should limit the extraction of oil?
For you the speed with which we extract oil is morally acceptable? There is some real risk to the environment and our health or are just conjecture?
p.s. know some relevant study about it?We should limit the extraction of oil?
At this time when so much of our country's money is going to oil rich countries, it only makes sense to produce as much as possible right now to bring the speculated price of oil down. Yes, it could be risky to do so, but that is better than our economy going completely down the tubes while other oil producing countries get rich on our money.We should limit the extraction of oil?
If you are intrested in green news go to green.yahoo.com. It is very intresting and informationalkids myspace
p.s. know some relevant study about it?We should limit the extraction of oil?
At this time when so much of our country's money is going to oil rich countries, it only makes sense to produce as much as possible right now to bring the speculated price of oil down. Yes, it could be risky to do so, but that is better than our economy going completely down the tubes while other oil producing countries get rich on our money.We should limit the extraction of oil?
If you are intrested in green news go to green.yahoo.com. It is very intresting and informational
Is it safe/effective to use butane for supercritical fluid extraction of cannabis oils?
My friend wants to make some blender hash but I've been wanting to try and make some blond hash for a while and I read a tutorial online that uses butane. My friend is a little wary about two things, he doesn't want to smoke butane, and he doesn't think it will extract the thc. I am asking A. will butane evaporate like alcohol if we let it sit out for a while, and will the leftover oil be safe to smoke, and B. will it even work? Is it efficient? Are we going to waste thc? are we even going to get any?Is it safe/effective to use butane for supercritical fluid extraction of cannabis oils?
The critical temperature of butane is 153C. You would have to heat the vapor at least that high. Also, you must compress the vapor to a few dozen atm to get a density of about 0.5g/mL. The extracted substance drops out of solution in the vapor when you release the pressure, so there is no need to ';evaporate'; the butane. It would be better to use supercritical CO2, because the critical temperature is only 31C.
The critical temperature of butane is 153C. You would have to heat the vapor at least that high. Also, you must compress the vapor to a few dozen atm to get a density of about 0.5g/mL. The extracted substance drops out of solution in the vapor when you release the pressure, so there is no need to ';evaporate'; the butane. It would be better to use supercritical CO2, because the critical temperature is only 31C.
Subscribe to:
Posts (Atom)